So getting back to my original question. Is this the best top airflow sub ohm tank on the market right now? Yeah! I got to say, it is. So far, it’s the one I like the best. I rank it right up there with that Ample Mace X tank with the pancake coils. You remember that one? That one had some bangin flavor for a top airflow tank. This Owl is a little better.
What’s up, insiders! DeucesJack at vapinginsider.com. Today, we’re going to be talking about that Advken Owl Sub Ohm Tank. Is this the best top airflow sub ohm tank on the market? Make sure you watch the whole review to find out.
What’s In The Box
- 1 Advken OWL Mesh Sub-Ohm Tank
- 1 Replacement 3mL Straight Glass
- 1 Pre-installed 0.2ohm Mesh Coil
- 1 0.16ohm Mesh Coil
- 1 Accessory Bag
- 1 Cleaning Cloth
- 1 Advken Manufacturers Card
In the kit, you will also receive a share your moment social media card. You get a straight glass which will hold 3mls of liquid. You also get a pre-installed bubble glass that holds 4mls of liquid. Here is your 0.16 Ohm coil. That’s your spare coil. You get some spare o-rings and accessories in this bag. You also get this nice little cloth to keep your tank looking nice and crispy.
From Top To Bottom
Here is your Owl tank. Check it out, man. It’s just got a really unique look to it. I’m diggin the look. Even though I’m not a top airflow guy, definitely diggin that look. This drip tip, it does take a little bit to get off. It’s in there quite snug. You kind of got to get your fingernail in there and go around the edges. You can see right there. It is a goon style drip tip. But it’s got more of a 510 opening. You’ll notice, all your other goon drip tips will fit it. No problem. They do fit nice and snug.
Now, see that mark right there? That’s your slider right there. Nice big opening there for the juice port. You can accommodate most juice bottles with that opening. Bullnose bottles may be a little messy. This slider, it’s got some nice resistance to it. But it doesn’t have any locking system to it. I do not like that. I point it out all the time on sliders with no locking system. I’m not going to stop pointing it out because I don’t trust this type of system in my pocket.
Here is your top airflow system right here. No stoppers. It spins all the way around. It’s got a nice resistance so I don’t mind that it doesn’t have any stoppers. But I would have definitely liked to have seen some stoppers. You can see the Owl branding in there. That’s kind of neat. I like that. I like the way they made cutouts so the coil can get its juice. I do like that Owl emblem right there. Nice job on that. A little bit of cutouts over here so you can get a grip. I kind of like that as well. On the bottom, you can see, you got an Owl emblem. You got a gold-plated 510 insulator ring around that. Stainless steel threading around that. Advken branding over there.
Not a lot of other tanks you can really compare this one to because it’s a top airflow sub ohm tank. Obviously the Owl is on the left. On the right is the Ample Mace X. You’ll notice, I also have the coil next to it. The coil that you see on the on the side right here, that is more of a pancake style coil. You’ll also notice that this does have top airflow as well. As far as I’m concerned, the Mace X was one of the best flavor sub ohm tanks with top airflow. And the Advken Owl is better. That’s exactly how I feel about it. Too very similar tanks. Different coils. The Advken Owl has some better flavor to it though.
Now, in order to access your coil, you just give the bottom a twist and you’ll see the coil. Rings nice and smooth. No issues with that. Now look at the way they did this airflow. This is kind of interesting. Now you see the top airflow is coming down from here. Let me take this coil out so I can show you where it’s going. Now that top airflow is coming down those slots and then it’s coming in through here, underneath the coil.
Can you see those little cutouts there? Kind of neat the way they did that. Definitely a little different. It’s a different design. I like that. I like the ingenuity of that. Nice job on that. Just a 0.2 Ohm coil that comes pre-installed. You can see, another mesh coil. This one has a rating of 50-70W. Here is the 0.6 Ohm coil. You can see, it’s best of rating from 60-80W. It’s a traditional mesh style sub ohm tank coil. Nice job on that. This is the one that comes as your spare.
First pro’s going to be, it takes smoke coils. It takes TFVA, Baby, Big Baby and TFV12 Baby Prince coils. That’s a definite pro because you can get those coils anywhere.
Next pros going to be, its top airflow baby. So there are no leaks.
I got to tell you, you guys know I’m not a top airflow guy. This is the most flavorful top airflow tank I’ve ever vaped on. This is the best top airflow sub ohm tank. I’m giving them a pro for that. The flavors are just there.
I like the looks of it man. I like that short stubby stout look. It’s a little different. I’m giving them a pro for that.
It’s got some nice build quality to it, man. They did a nice job putting this thing together. That’s a pro.
Two coils included in the kit. I like that. I always give a con when there’s one coil. I got to give a pro when there’s two coils.
Nice cloud production on this one. Nothing wrong with it. Check it out. Real nice cloud production. Great flavor.
This thing comes in a bunch of nice colors. Stainless steel, black, rainbow, purple, coffee, green.
And the last pro is got to be that price point man. On the 30 bucks, this thing’s our big win.
Let’s get into this one. Let’s get into the cons and the pros.
First cons going to be, it’s got a weird drip tip, man. You saw it in the down-low. Some people just aren’t going to like that type of drip tip. It doesn’t bother me but it’s definitely out of the ordinary so I got to point it out.
Those mesh coils. They just rip through the juice. I mean, man, you’re filling this tank constantly. So I got to point that out as well.
And the last cons going to be, no lock on that slider cap. I hate top caps like that. You know me. I’m always running around. I’m on mass transit all the time. I’m always shoving mods in my pocket. Tops like this, I always wind up with a pocket full of juice. I’ve learned not to use them as my runaround setups. But you know, I got to give it a con because I can’t use it the way I want to use it. They should have put some type of locking system on it.
Let’s get into the pros because believe me, on this one, there are plenty of pros.
Big shout-out to Element Vape for sending this to me for review. Make sure you check the link down below.
Make sure you click the thumbnails on the screen. Check out some of our other videos.
That’s it, folks. That’s all we got today. You keep living that vape life. We’re out of here. Deuces.
- 25mm Diameter
- 3mL Standard Juice Capacity
- 4mL Bubble Glass Capacity
- 30mm Widest Bubble Glass Diameter
- Pyrex Glass Reinforcement
- Superior Stainless Steel Chassis Construction
- Sliding Top Refill System – Push Top
- Advken OWL Mesh Coil Family
- 0.16ohm Mesh Coil – rated for 60-80W
- 0.2ohm Mesh Coil – rated for 50-70W
- Knurled Top Airflow Control Ring
- Available in Stainless Steel, Matte Black, Gold, Rainbow, Blue, Coffee, Purple, Green
- Smoke coils
- Top airflow
- Flavorful top airflow tank
- Nice build quality
- Two coils included in the kit
- Nice cloud production
- Nice colors
- Price point
- Weird drip tip
- Mesh coils
- No lock on that slider cap