What’s up, Insiders? DeucesJack at vapinginsider.com. Today, we’re going to be going over the Oukitel Bison pod, AIO system, whatever you want to call it. I think one time during the down-low, I refer to it as the Oukitel. That’s probably how they say it in Borough Park in Brooklyn. If you’re from New York City, you’ll know exactly what I mean. Let’s get into this one. Let’s check it out.
Before we get into the video, make sure you check out our new merch site. You can get my tagline on a shirt or a hoodie.
FROM TOP TO BOTTOM
Check that out. That’s kind of neat. Nice resin panel. It’s beautiful. I’m Diggin the yellow. I’ve never really had a yellow mod before. There’s your screen. You got this nice fire button here. It’s got a little bit of rattle but it’s not terrible. See? It’s raised, it’s got some texture to it. Really, really, nice job on that. I like the texture here as well. I like that satin type of finish on the sides. Really, really nice job. There is your micro USB port for charging. I like that they put it on the outside and didn’t hide it. Some Oukitel branding here. That pod could be a little lighter. Definitely, on the dark side, I don’t like that.
On the bottom, we’ve got some venting. Feels really nice. The build quality, the way this thing feels in the hand is actually really, really nice. Now you got a little bit of knurling over here. I don’t know if you can see that, but you got a little bit of knurling on that top cap there so you can get a grip and you can open it up and fill it up. Threading on it is actually really nice and smooth. You can see, nice big fill port. Plenty of room to displace air. Really, really nice job on that. Now, this drip tip is very, very comfortable but non-removable. It does not come out but it is comfortable. It’s kind of like a 510 size.
I wanted to give you a quick size comparison. Here is the brand new Lost Vape Orion Plus. You can see, they cleared up the pod so you could actually see your juice level. I wish they would have done that here. And here is the brand new Squid Industries Squad. All three of these are basically what you would consider an AIO kit. Yes, they are in pod form factor but you can swap the coil on all of them which makes them an AIO. Now you can see, it’s definitely a little nicer looking than the Squid Squad as far as build quality and looks go. This one’s definitely a lot classier looking but basically the same overall form factor. The Squid is a little chunkier. This is probably the most copied form factor, the Orion form factor. You can see, they definitely took their design cues from it. But I will tell you this, the build quality on this Bison actually rivals the Orion, the Lost Vape build quality. It’s that good. They did a nice job on it, they really did. The one big advantage that the Lost Vape has over the Oukitel is the Lost Vape has adjustable airflow, the Oukitel does not. And that’s actually a big, big advantage when you’re comparing the Orion to the Bison.
Now, in order to take the pod out, it’s pressed fit, you just kind of give it a pull. It’s in there pretty snug, it really is. And it does not come with any of the coils pre-installed. We’re going to go over the pod in a second. Got these two little gold plated pins. They will make contact with your coil and fire it over here. You got these little rails here that the pod slides into and the fitment of the pod is actually really nice. As I said before, I would have liked to have seen this pod a little clearer especially with this black border. They could have made this a lot more translucent. Probably would have been a lot better. Over here, is where you install your coil. It’s a simple press-fit coil. You just take your coil, make sure all the square sides line up and you pop it in there just like that. Very, very easy to install your coil. You want to grab it out, just pop it out like that and out it comes. The nice thing about this is if you have less than three-quarters of a tank, if you do have to service your coil and pop it out, you can pop it out with the coil on the top here like this, and all your juice will flow down and you won’t lose all your juice. I do like that, a nice system.
Here is the coil we’re going to be using. This is the 0.6ohm mesh coil. You can see, it’s got this little base. You got to make sure the flat sides are all facing the flat sides on the pod.
The juice we’re going to be using today is some Juice Head’s Watermelon Lime. In order to prime this coil up, it’s a small coil, just take a couple of drops of juice and just put it right down the middle. One, two, maybe three and that’s it. That’s all you want to do.
Now we’re going to take our coil. We’re going to make sure all the flat sides are lined up. Flat side, flat side, flat side. The curve goes towards the opening and just pop it in just like that. You want to unscrew your little fill port right there, take your juice bottle and give it a good squeeze. Get that juice in there, fill it up all the way to the top. Put your little fill port cap right back on there, give it a nice screw-down, and now we’re going to let this sit for a minute while we go over the other coil.
Here’s the second coil that comes in the kit. This is the 1.2ohm coil. This is the ceramic coil, the mouth-to-lung coil. Now you can see the airflow on this, there’s just not a lot of airflows. This is a legitimate mouth-to-lung vape. It’s actually a very good coil, I do like it. It does work well with nic salts. I have to say, though, I like the mesh coil better.
Let’s install our pod. You just slip it in like that. Make sure that the drip tip is on the side of the USB port. And you just pop it down like so, just like that. Remember, drip tip on the side of the USB port. Fill, pour it on the side of the fire button. 5 clicks, you can see it’s turning on. And now you can see, we have our screen. You got battery meter, the battery life in percentage, puff counter in seconds, wattage. And you can see, it detected the 0.6ohm coil. This has an auto-detect feature. Now, in order to change the wattage on this, you click the fire button three times. And once the screen starts to blink, you click it twice. Watch. Now I’m at 15W, now I’m at 20, now I’m at 25, now I’m at 30, back to 10W. That’s how you change the wattage on this. We’ll put it up to 20. And now, you just let it timeout, or you can click the fire button and confirm whatever you want to do.
Now, the other interesting thing is when you put the mouth-to-lung coil in here, It has a nic salt CBD mode that you can click between. I didn’t notice a difference between the two modes. Even though I don’t vape CBD, I did try it. I didn’t notice a difference. I don’t know why they do that. They should have just kept the straight wattage and let you vape it this way. I can’t put that coil in there because I just filled this tank up but I just want to make you aware of that.
WHAT’S IN THE BOX
- 1 BISON Battery Body
- 1 BISON Pod
- 1 0.6ohm Mesh Coil
- 1 1.2ohm Ceramic Coil
- 1 User Manual
- 1 MicroUSB Cable
- 1 Lanyard
- 1 Outer Box
Alright, Insiders! Let’s get into the cons and pros of this one.
First, con is going to be that non-removable drip tip, I don’t like it. That’s a con.
That CBD salt nic mode on, on the higher ohm coil, I didn’t show it to you down low because I only had one and I didn’t have a chance to empty out the tank and put another coil in there. But it can be a bit confusing. I haven’t noticed any difference in both modes. When I tried the higher ohm coil out, they both seemed to vape the same. I don’t know why they just didn’t keep it straight wattage in that mode. It’s a bit of a con only because it probably could be confusing to some newbies.
No adjustable airflow on this thing. Come on, you could have done that on this thing. That’s a con.
The pod, the pod could definitely be clearer. It’s a little clearer than most but I would have liked to see a more translucent pod.
And the last con is going to be when this thing goes into sleep mode and you fire it not knowing it was in sleep mode, it’s got a little bit of a delay. So if you notice, it’s in sleep mode. Click that button real quick. Wake it up and then you won’t have that issue. But it shouldn’t have that issue, to begin with. It’s a con.
But that’s it on the cons, a lot of nitpicky stuff. Let me tell you something, I love this pod. This thing’s got some pros so let’s get into it.
The first pro’s going to be, I get great flavor and clouds off of this thing. Check it out. Got it on the
The first pro is going to be, that mesh coil is simply awesome. The flavor is fantastic. It’s one of the best mesh coils I’ve ever used on one of these little pod AIO systems. Let me show you what I’m talking about. Right now I got it installed here. I got it at 25W. Check it out. Are you kidding me? Did you see the cloud production on this little thing? It’s unbelievable. Here, let me show you again in case you missed it. Unbelievable. Flavor, fully saturated. It’s got more heat than most systems of this size most pod/AIO system. It’s just a fantastic vape on that mesh coil. Best mesh coil I ever tried in this type of system, hands down.
The mouth-to-lung coil on this one, it’s pretty good as well. But I love the mesh coil. But I’ll give them a pro for the mouth-to-lung coil as well.
Fit and finish on this one is just gorgeous. Oukitel did a bang-up job on this one. It’s a pro.
pretty good I like the little screen. It’s bright, it’s well laid-out. I can see it in all lighting conditions, pro.
This one’s got a really smooth draw.
It fires fast.
The mesh coil has like a restrictive DL draw which I really, really like. it’s fantastic. I think it’s great. I do wish it did have adjustable airflow but I love the draw on the mesh coil. It’s just fantastic. I wouldn’t need to adjust with that coil installed. The mouth-to-lung coil has a legitimate mouth-to-lung draw on it. It’s a tighter draw. I showed you the airflow hold down low. It’s definitely a legit mouth-to-lung draw.
So I do like the airflow range that you get with coils even though there’s no adjustable airflow. They did distinguish the two of them. There is definitely a difference when you vape the two of them, so I got to give them a pro for that. Because a lot of times in systems like this, when you get a mouth-to-lung coil in the dl-coil, the airflow is no different. You know you can’t tell the difference. On this one, you can. It’s a pro.
This thing charges fast.
I love the plug-and-play coil system, that’s a pro.
And the last pro is going to be, it actually has a nice capacity.
So let’s talk about this one, Insiders. Those are my cons and pros. Let’s get into this one a little bit.
I got to tell you, I honestly feel like this thing is probably one of the sleeper AIO kits of the year. I don’t know why nobody is not talking about this system. It is absolutely fantastic. The mesh coil just hits all the marks as far as I’m concerned. I’ll put it to you this way. There’s a couple of pod system, pod/AIO systems that I could use instead of like a full battery dual setup with a sub ohm tank, there’s a few systems out there that I could use that would give me that same satisfaction. I put this on the same level as like the Breeze NXT, the Squid Squad, and this. I could get by all day if I just had to vape this thing. That’s how good it is. If this sounds like something that’s right up your alley, make sure you check out the link down below because if you vape the way I do and you like that type of flavor and that type of vape, you’re going to want to check this one out for sure.
Let’s get into some of the specs on the Oukitel Bison pod system. It measures in at 93mm x 38mm x 15mm. It has a 1,000 mAh battery with a 30W maximum. It will fire down to 0.6ohms. It has power mode and nic salt mode. It features auto pod detection. It’s made out of zinc alloy and resin construction. The Bison has a 2ml capacity and it comes with two coils, a 0.6ohm mesh coil made out of stainless steel 316 and a 1.2 ohm ceramic coil. Colors available are rainbow, black and gold.
- Dimensions – 93mm by 38mm by 15mm
- Integrated 1000mAh Rechargeable Battery
- Wattage Output Range: 10-30W
- Voltage Output Range: 3-4.2V
- Resistance Range: 0.6-1.2ohm
- Power Mode
- Nic Salt Mode
- Automatic Pod Detection
- Zinc-Alloy & Resin Chassis Construction
- Single Button Operation
- LED Screen
- Refillable Pod – Replaceable Cartridge
- 2mL Pod Capacity
- Threaded Top Fill System
- Oukitel BISON Coil Series
- 0.6ohm SS316L Mesh Coil
- 1.2ohm Ceramic Coil
- Plug ‘n’ Play Coil Installation
- Magnetic Pod Connection
- Intelligent Atomizer Recognition
- 8s Cut-Off Protection
- Bottom Heat Dissipation Vents
- MicroUSB Port
- Available in Prism Rainbow, Bright Black, Prism Gold
Thanks for watching the video, Insiders. Definitely appreciate it. Remember, we’re not a monetized channel so we’d appreciate it if you check out our new merch store. You can get my tagline on a shirt like you see me wearing, or you can get it on a hoodie as well. We have some other great designs that you can put on a t-shirt or hoodie. Here’s another one of them, Vape King shirt and here’s one of my personal favorites, Vape So Hard That FDA Wanna Fine Me. Go over to our new store and check it out.
And that’s it, Insiders! That’s all I got for you today. Make sure you participate in our fight to vape. Make sure you call your state legislators, your governors, and the White House. It only takes about 15 minutes out of your day and we need your help. They’re trying to kill our industry. You have to tell them you vape, you vote, and you will not support anybody that supports any type of flavor ban. It’s more important now than ever, Insiders, that you keep living that vape life. We’re out of here. Deuces.
- great flavor and clouds
- pretty good mouth-to-lung
- awesome mesh coil
- Fires fast
- Plug and play coil system
- really smooth draw
- charges fast.
- non removable drip tip
- CBD salt nic mode
- No adjustable airflow
- Dark Pod
- little bit of a delay