Hey, Insiders! DeucesJack at VapingInsider.com. Today, we’re going to be going over the Squid Industries Peacemaker V2 sub-ohm tank. I got no box, I got no instructions, I got no spare coil. All I got is the tank that was handed to me at ECC by the Squid King himself, Eric. We’re just going to do a review and go with it. Let’s kick it down low.
Before we get into the video, make sure you check out our new merch site. You can get my tagline on a shirt or a hoodie.
FROM TOP TO BOTTOM
Alright, Insiders! Got to apologize for no box, no parts, on this one. This tank was actually handed to me by the Squid King himself over at ECC. In fact, if you watch my interviews on the channel, you actually saw him hand it to me. So I got no box, I got no spares, I got no nothing with it. But I’m going to tell you what it comes with, up in the specs anyway. This is just something that was handed to me.
Check it out, nice drip tip. Check out that drip tip, beautiful. 810 style drip tip, all your other 810s will fit fine. It is the goon style with the o-rings on the inside of the cap. In order to access or fill this thing up with juice, threading is super smooth, you unscrew the top cap and you can see it’s machined very well. Recessed, super nice juice ports right there. Big, you can accommodate almost any type of bottle, even bullnose bottles. The recessed definitely helps with not creating a mess should you overfill a little bit. Really nice job on that so far.
Once you’re all filled up, put that top cap back on and like I said, threading on this is really, really nice. I’m kind of diggin the cutouts over here, they help you get a grip. And it’s got like that soft, silky, satiny, rubbery type of feel on it. Really nice job on the finish. The finish on this thing is beautiful. Here you can see, you have a glass right there, but it’s very protected. If you break that glass, you kind of got to hit it in a one-in-a-million shot. So that’s going to make this tank a really good choice for those indestructible mods, the Tinker 2, the Aegis series, things like that. This is going to go really well with.
On the bottom, we got bottom airflow, stoppers on both ends, whatever you adjust on one happen on the other. On the bottom of the atomizer, you can see, gold-plated 510 pin, insulator ring around it, stainless steel threading around that, Peacemaker V2 branding, designed by Squid Industries.
Now, in order to access your coil, you give it a little twist. Mine’s a little tight for now. And again, threading very, very smooth. Pop it out and there is your mesh coil. Now, This is the Squid Industries mesh coil, 0.2 ohm, good for 50-80W. You can see, just a single mesh in there, no big shakes. This does take Baby Beast mesh coils, so be aware of that. Another thing I don’t have it because I don’t have the retail packaging but the retail packaging will come with an adapter that lets you run a mouth-to-lung coil. The adapter will allow you to run Aspire BVC coils. So that’s kind of cool, I like that a lot. I like versatility. I can’t talk about the performance because I don’t have the adapter and I haven’t tried it so I wouldn’t mislead my subs. But I can tell you I have vaped on Baby Beast mesh coils. Their QC has definitely gotten better and I have vaped on this Squid mesh coil and it is fantastic.
Let’s install this coil and let’s juice it up. It’s almost fall time in New York. The weather’s getting cooler so it’s time for me to break out my fall time vapes. This is Brewed Awakenings Apple Cider. Awesome, awesome juice. Let me show you how we do stirs coil up with some Brewed Awakening. You open the cap of that Brewed Awakening and it smells like fall, it really does. Take some of your juice, put it around the edge there, just like so. Get it in the middle a little bit. Get that cotton nice and soaked up.
Then you want to go around each little juice port and just give it a little paint. That’s all, just get it started. Maybe go back on the top after it’s soaked some of that juice in and line it up with a little bit more juice. Make sure it’s nice and juiced up. Take your coil, pop it in there, give it a little reverse thread so it catches and then installs that beautiful mesh coil. Make sure it’s nice and tight. Open up your top cap, get into those huge juice ports, give it a nice squeeze. You see, that fills up really nicely. And you can see, because of the recessed juice port, I didn’t make a mess even though I over squeezed a little bit. Put your top cap on there, a little reverse thread, let it catch, and now we’re all juiced up and we’re ready to vape.
Before we cut back on top, Insiders, I just wanted to install it on my navy Double Barrel V3 just to show you what it looks like. I think it absolutely looks fantastic.
WHAT’S IN THE BOX
- 1 Squid Industries Peacemaker V2 Sub-Ohm Tank
- 1 810 Delrin Drip Tip
- 1 Delrin Coil Adapter
- 1 MTL Mesh Coil
- 1 DL Mesh Coil
- 1 Extra Glass
Alright, Insiders! Let’s get into the cons and the pros.
First con’s going to be, the airflow on this one, a little bit on the loud side. Let me show you what I’m talking about. Hear that? It almost sounds like it wants to whistle, right? Cut it down about halfway, gets a lot smoother. And that’s where I run it anyway. I run it about halfway open, but wide open, it almost feels like it wants to whistle. That’s a con.
I like the fact that it’s versatile but some people are going to complain that they went with the Baby Beast coil compatibility. Now, I’ll say this. Yes, Smok had a bad track record with their coil QC, to their quality control on their coils. I’ve noticed the last few tanks that I’ve gotten from them, their quality control on their coils have has gotten much better. But people are going to complain that it’s Baby Beast coil compatible. For me, it’s not an issue. For some people, it’s going to be an issue. So I got to point it out.
But that’s it on the cons. I ain’t got a lot to complain about on this one. Let’s move on to the pros.
First pro’s going to be, it’s versatile. It’s a direct-lung tank or a mouth-to-lung tank. Because I didn’t get the adapter or any of the accessories or the BVC coil with it, I can’t intelligently comment on whether it vapes well as a mouth-to-lung coil. I wouldn’t lie to you like that. I’m just not going to comment on it. I’m just going to address the fact that it can take Aspire BVC coils with the included adapter in the retail packaging that you’re going to get. And that in itself is a pro.
I like the fit and finish on this one. it’s nice, pro.
Like I said, it takes Aspire coils and Smok Baby Beast coils. It’s a pro because both those coils are available everywhere.
I like the fact that your glass is protected. I think these types of tanks go great with the Double Barrel. It looks awesome on there. But it also goes great with something like an Aegis Legend and Aegis X or Tinker 2. Those types of indestructible mods work really well with this type of tank because it gives you a whole setup that’s indestructible. So I’m going to give it a pro because that glass is protected.
It’s got smooth airflow. Even though it’s a little loud, it’s not turbulent when it’s wide open, but close it down halfway, and it’s very smooth.
Smooth threading and machining, that’s a pro.
It looks great on the DB.
You get great capacity with the bubble glass. I don’t have a bubble glass but I have the bubble glass with the RTA version and I’m sure it’s very similar. You can get some big capacity with the bubble glass.
I like the color selection on this one that’s available.
So far, I’ve been getting great flavor and clouds. I got the Squid coil in there. I’m at 58W right now. Let me show you what I’m working with here. Had the airflow about halfway open on that one, I’m getting some nice, thick, dense clouds. And definitely check out that juice that I showed you down low, that Apple Cider juice, it is phenomenal in this thing. Let’s have another hit. Yeah, just really nice and saturated flavor. I’m getting the heat I like, that apple is coming through beautifully. It’s got really nice flavor and clouds, no doubt about it.
So that’s it, Insiders! Those are my cons and pros.
I know this review was a little incomplete because I didn’t have the complete kit but I tried to do my best with what I had. Like I said earlier, I loved the fact that the tank, the glass is protected. If you’re one of those people that likes rocking those bulletproof mods but your only weak point on those mods are the glass tanks, you’re definitely going to want to check this out because then you’ll have a fully bulletproof setup. That’s the way to go, man. Trust me. This tank is definitely DeucesJack approved. Check out the link down below.
Let’s go over some of the specs on the Squid Industries Peacemaker V2 sub-ohm tank. It measures in at 25mm. When you run the direct-lung mesh coil with the metal tank section, you’ll get a 3.5ml capacity. With the bubble glass, you’ll get a 6ml capacity. If you run the mouth-to-lung mesh coil with the metal section, you’ll get a 5.5ml capacity. With the bubble, you’ll get an 8.5ml capacity. It does take Aspire BVC and Smok Baby Beast coils.
In the box, you’ll get a tank, two coils, both mesh, one mouth-to-lung, and one direct-lung coil. You’ll also get a bubble glass in your packaging as well. The Squid Industries Peacemaker V2 is available in navy blue, army green, rainbow, black, and stainless steel.
- 25mm Diameter
- Acrylic & Steel Cage Juice Reservoir
- Bubble Glass Replacement Glass Reservoir
- 304 Superior Stainless Steel Tank Construction
- Threaded Top Fill System – Fill Ports
- Squid Industries Coil Series and Compatibility
- Compatible with Squid Industries B1 & B4 Coils
- Aspire Nautilus BVC Coil – Adapter Needed – (5.5mL / 8.5mL)
- SMOK Baby Coil Compatibility – (3.5mL / 6mL Capacities)
- Threaded Coil Installation
- Adjustable Dual Slotted Bottom Airflow Control Ring
- Threaded 510 Connection
- Available in Black, Rainbow, Stainless Steel, Navy Blue, and Army Green
Don’t forget, Insiders! It’s very important that we fight for our right to vape. Take 10-15 minutes out of your busy day. Call your local state legislators, call your governor, call the White House. Let them know we vape and we vote and we will not support any candidates that are against vaping.
Thanks for watching the video, Insiders. I definitely appreciate it. Remember, we’re not a monetized channel so we’d appreciate it if you check out our new merch store. You can get my tagline on a shirt like you see me wearing, or you can get it on a hoodie as well. We have some other great designs that you can put on a t-shirt or hoodie. Here’s another one of them, Vape King shirt and here’s one of my personal favorites, Vape So Hard That FDA Wanna Fine Me. Go over to our new store and check it out.
That’s it, Insiders. That’s all I got for you today. It’s more important now than ever that you keep living that vape life. We’re out of here. Deuces.
- Takes Aspire and Smok Baby Beast Coils
- Glass is protected
- smooth airflow
- Looks great on a double barrel
- Great bubble glass capacity
- Color selection
- Great Flavor and clouds
- Airflow a bit on the loud side
- Baby Beast coil compatible